9030 motion control card for the latest economic, USB2.0 interface, four-axis pulse control, 5-way encoder input can be used with the use of the IPC, desktops, laptops, etc., widely used in engraving machines, milling machines , machining centers, cutting machine, punching and other processing equipment. 

 The first domestic support spline interpolation (Nurbs) allows surface machining speed is increased by 2-3 times than common short linear processing Machined surface is more smooth! ! 

 Hardware structure 
 l 4-axis control card, USB2.0 interface, based on FPGA + SOC structure 
 l-axis control mode: ① pulse output (2) Pulse output + encoder feedback 

 l: 4-way shaft of the encoder input feedback +1 road hand-wheel, four-octave increments, highest frequency: 12.5MHz 

 l pulse differential output, the highest frequency 8MHZ, can be set to the OUT / DIR or CW / CCW 

 l The 32-channel optical compartment IO input 24 generic +8 the handwheel IO (when Universal the IO) 

 l 12 road IO output, 8 Darlington output, 4-way light separated from the output (motor enable) 

 the PWM pulse of l 1/12 DA analog output: PWM frequency range 1-1000000HZ; 12-bit DA output range ± 10V 




 Software Support 
 l Support the Windows2000/XP environment VB, VC, BCB and Delphi programming 

 l Sport mode: single-axis position mode, single-axis speed mode, multi-axis electronic gear mode and multi-axis interpolation mode (linear interpolation, circular interpolation, helical interpolation and NURBS curve interpolation) 

 l system operator interpolation cycle of 1 ms, to ensure the interpolation computation accuracy, interpolation speed smooth and real-time. 

 l over 100 interface functions (including axis control command and I / O commands, etc.), to facilitate the development of numerical control system software and to achieve a variety of applications. 

 l The 1-4 axis linear interpolation 

 l 2-4 axis of the arc (any 2 axes circular +2 axis linear) interpolation 

 l Support the 3,4-axis NURBS interpolation 

 l axis position servo encoder (thread cutting or hard tapping) in proportion to 

 l advanced the speed of planning and interpolation preprocessing functions: cache 256 line interpolation segment to automatically optimize the interpolation between the line speed, the small line between the continuous high-speed, high-precision smooth interpolation. 

 l PWM output pulse width and the interpolation speed servo, to meet the advanced applications of the laser industry, real-time control of electrical power. 

 l virtual coordinate axis programming, flexible set of motor control channel and the actual axis of the corresponding 

 l user units programming, intuitive programming, minimum amount of calculation of the intermediate unit conversion. 

 l absolute programming, there is no cumulative error and calculation error 


 The numerical control system of the 9030 motion control card support: (optional) 

 The l WinCNC engraving and milling systems 
 the l WinCNC laser cutting system (support wire drawing dies) 
 the l WinCNC water cutting system 
 l WinCNC flame / plasma cutting systems 
 the l WinCNC glass cutting system 
 the l WinCNC along with moving cutting system (fabric / leather / sponge / paper / wood, etc.) 
 the l WinCNC dispenser system 
 l WinCNC punch CNC system 


 Beijing Dong Fang Jiahong Electrical and Mechanical Technology Co., Ltd 
 Web site: www.dfjzh.com 
 Contact: Mr. Wang 
 Phone: 13581986785