6050 motion control card is our latest high-performance 4-axis motion control card. Use of DSP hardware and high-speed PCI bus interface, the interpolation operation cycle to 0.5ms. Provide control and flexible I / O interface, providing a rich user-friendly driver software to run fast because of its characteristics, in particular, and other requirements for high-speed engraving machine CNC machine tools. 6050 cards support both Nurbs curve interpolation. 

 Hardware 
 ● 4-axis control card, PCI-bus half-length card, FPGA + DSP Structure 
 ● The maximum pulse output frequency 8MHZ, in the form for OUT / DIR or CW / CCW 
 ● 20-channel optical inputs separated 
 ● 8 Lu Dalin Dayton amplified output, the maximum drive current of 500mA. 2 of them for the relay output selectable output: 24VDC/120VAC 
 ● 1 Road PWM pulse / 12-bit DA analog output: PWM frequency range of 18-150000HZ; 12 位 DA output range is ± 10 V 
 ● 1 Road optical encoder type: differential / single-ended A, B, Z-phase, 4-octave 

 Software Support 
 ● Support Windows2000/XP environmental VB, VC, BCB and Delphi programming 
 ● Sport mode, including: single-axis position mode, velocity mode of single-axis, multi-axis electronic gear mode and multi-axis interpolation mode (linear interpolation, circular interpolation, helical interpolation and NURBS curve interpolation) 
 ● system operator interpolation cycle of 0.5 milliseconds (advanced) to ensure the accuracy of the interpolation operation, interpolation smoothness and speed of real-time 
 ● to provide more than 100 interface functions (including the rich-axis control commands and I / O commands, etc.) to facilitate the preparation of numerical control system software and applications to achieve 
 ● 1-4 axis linear interpolation 
 ● 2-4 axis circular (any 2 axis circular +2 axis linear) interpolation 
 ● support the 3,4-axis NURBS curve interpolation (advanced) 
 ● proportion follower axis position encoder (thread cutting or hard tapping) 
 ● speed of advanced pre-planning and interpolation functions: interpolation buffer 64 line segments, automatically optimizes line interpolation between the speed of small line between the continuous high-speed, high precision smooth interpolation 
 ● interpolation between the plates can be achieved up to 4 cards sharing, enabling the control of 16 axes interpolation 
 ● PWM output pulse width and the interpolation can be achieved with the moving speed to meet the power of the laser industry, real-time control of the power of advanced applications 
 ● virtual axis programming, flexible settings with the actual axis of the motor control channel the corresponding 
 ● user units programming, visual programming, unit conversion between the minimum amount of computation 
 ● absolute value of the programming, there is no accumulation of errors and calculation errors 

 6050 to support the NC system are: (optional) 
 ● WinCNC engraving and milling system 
 ● WinCNC CNC laser processing 
 ● WinCNC CNC Water Cutting 
 ● WinCNC CNC Flame Plasma 
 ● WinCNC CNC glass cutting 
 ● WinCNC cutting numerical control system with dynamic 
 ● WinCNC NC Department of dispensing